Beryl no Notebook Mirax mm6610 – Debian Lenny

Depois do que escrevi sobre o Notebook Mirax com o Debian, disse que o sistema em questão tinha problemas e não consegui executar o Beryl por causa do que eu supunha ser o driver de vídeo. Na realidade, o problema em questão era realmente com o driver: no X.org, existem dois drivers para as placas Intel gráficas, o i810 e o intel. O primeiro driver é ótimo para compatibilidade, mas tem problemas com recursos avançados das placas mais novas, como o chipset Intel 945GM que equipa o Notebook em questão. Mais especificamente, o problema é que esse chipset define dinamicamente a quantidade de memória RAM a ser compartilhada com os gráficos até um limite de 256 MB. O driver i810, porém, não reconhece esse recurso, o que impede o aumento da memória de vídeo e, portanto, o uso dos gráficos 3D mais turbinados exigidos pelo Beryl e pelos jogos 3D. Foi necessário mudar o driver para intel, que é um driver mais otimizado para os chipsets novos que contam com esse recurso, o que é esclarecido nas manpages dos drivers em questão. Apenas foi necessário editar o arquivo /etc/X11/xorg.conf de modo que a seção do driver de chipset gráfico ficasse como abaixo:

Section "Device"

	Identifier	"Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller"

	Driver		"intel"

	BusID		"PCI:0:2:0"

	Option "XAANoOffscreenPixmaps" "true"

	Option "MTRR" "on"

	Option "LinearAlloc" "6144"

	Option "UseFBDev" "false"

	Option "AddARGBGLXVisuals" "true"

#	VideoRam	16384	

EndSection

Após isso, bastou reiniciar o X (com um comando /etc/init.d/gdm restart em um terminal virtual – CTRL+ALT+F2 para chamar um) e chamar o Beryl Manager (beryl-manager). Ao aparecer o ícone do cristal vermelho no systray, basta selecionar nele como gerenciador de janelas padrão Beryl. Em seguida, escolha nele como padrão o Emerald, que oferece os decorators (barra de tarefas, etc…) do Beryl.
Abaixo algumas imagens do Beryl no meu notebook. Estou usando para criação de janelas o efeito Raios de Luz e para encerrar o efeito Fogo. Os demais efeitos são padrão do Beryl.

Powered by ScribeFire.

BrOffice.org: Um inventivo sistema de controle de versões para o OpenOffice.org

Por Dmitri Popov (23/07/2007 – 9:00:00 AM)

Original em inglês: http://www.linux.com/feature/118083

Embora o OpenOffice.org permita que você salve múltiplas versões de um documento, esse recurso possui uma série de problemas que limitam sua utilidade. Para os iniciantes, salvar todas as versões de um documento no mesmo arquivo é o mesmo que colocoar todas as suas fichas em um cavalo só. Mais importante, esse mecanismo torna difícil compartilhar versões dos documentos com outros usuários e controlar as mudanças feitas no documento. Uma alternativa, um sistema completo de versionamento ou uma solução dedicada para o gerenciamento de documentos é supérflua se tudo o que você precisa é de uma forma simples de manter modificações em versões de um documento e permitir que outros usuários saibam delas. Uma solução mais compromissada usa o OpenOffice.org para manter um feed RSS com as mudanças no documento.

A solução completa consiste em um arquivo do Writer que contêm os dados do feed RSS, e uma macro em OpenOffice.org Basic que faz duas coisas: salvar uma versão dos documentos atualmente abertos e criar um item no feed RSS ligando-o à versão salva. Para melhor entendimento de como essa macro funciona, vamos dar uma olhada em um feed RSS que tem as informações que precisamos para o controle de versões.

  <?xml version="1.0"?>

  <rss version="2.0">

    <channel>

      <title>OpenOffice.org RSS Feed</title>

      <link>http://192.168.1.7</link>

      <description>A simple feed that tracks changes in OpenOffice.org documents</description>

      <language>en-us</language>

      <generator>OpenOffice.org 2.2.1</generator>

      <item>

        <title>Loremipsum.odt</title>

        <description>Initial version of the document.</description>

        <guid>http://192.168.1.7/Loremipsum.odt</guid>

      </item>

    </channel>

  </rss>

Como você pode ver, o feed nada mais é que um arquivo XML plano composto por duas partes: um preâmbulo estático que contêm informação de meta-dados sobre o feed (título, descrição, etc…) e os items do feed, o que incluí nomes, descrições e links para os documentos apropriados.
Olhando para o feed, é fácil imaginar que a macro deveria simplesmente criar um novo item para cada versão salva do documento e o escrever no arquivo RSS. Embora o OpenOffice.org possa ler e escrever arquivos de texto puro, ele não é muito bom ao manipular. É por isso que iremos criar um arquivo de documento do Writer (por exemplo: RSS.odt) que conterará o feed RSS. A macro então irá usar esse arquivo para criar as novas entradas RSS e salvá-las em um arquivo .xml. Inicialmente, o arquivo RSS.odt deverá conter um feed vazio sem nenhum item nele:

  <?xml version="1.0"?>

  <rss version="2.0">

    <channel>

      <title>OpenOffice.org RSS Feed</title>

      <link>http://192.168.1.7</link>

      <description>A simple feed that tracks changes in OpenOffice.org documents</description>

      <language>en-us</language>

      <generator>OpenOffice.org 2.2.1</generator>

    </channel>

  </rss>

Uma vez que o documento RSS.odt estiver pronto, você pode começar a trabalhar na macro. Primeiro, você tem que definir algumas variáveos e checar se o documento foi salvo:

  Sub AddRSSItem()

  Dim ObjSearch As Object

  Dim Args(0) As New com.sun.star.beans.PropertyValue

  ThisDoc=ThisComponent

  If ThisDoc.hasLocation=False Then

  MsgBox ("You must save the document first!", , "Attention!") :End

  End If

Em seguida, a macro terá que obter o nome do arquivo atualmente aberto, pois ele será usado como o título da entrada no feed:

  DocURL=ThisDoc.getURL()

  FileName=Dir(DocURL, 0)

Uma vez que a macro escreve primeiro a entrada de RSS no documento RSS.odt e em seguida o grava como um arquivo XML, você precisa especificar três valores: o caminho para o arquivo RSS.odt, o caminho onde o XML de saída deverá ser salvo e o nome do arquivo XML.

  RSSFile="ftp://user:password@192.168.1.7/web/RSS.odt"

  RSSPath="ftp://user:password@192.168.1.7/web/"

  RSSXMLFile="rss.xml"

No exemplo acima, tanto o RSS.odt quanto o arquivo rss.xml resultante estão armazenados no mesmo local em um servidor FTP local, portanto os usuários de RSS locais podem assinar o feed RSS. Mas você pode publicar o feed RSS em um servidor Web e manter o documento RSS.odt em sua máquina local.

A macro também adiciona um timestamp que atua como identificador único de cada versão salva. Há várias formas de fazer-se isso, dependendo de como você quiser o adicionar. O código abaixo adiciona-o como um prefixo AAAAMMDD_HH-MM-SS_ ao dcoumento. Ele então utiliza o RSSPath para salvar a versão do documento no mesmo local no arquivo rss.xml, desse modo tornando mais fácil ligá-lo a ele:

  Timestamp=CDateToISO(Date) & "_" & Format(Hour(Now), "00") &_

  "-" & Format(Minute(Now), "00") & "-" &_

  Format(Second(Now), "00")

  VersionPath = RSSPath & Timestamp & "_" & FileName

Uma vez que a macro tenha todos os elementos necessários, ele salva a versão do documento atual com o timestamp:

  Args(0).Name="Overwrite"

  Args(0).Value=True

  ThisDoc.storeToURL(VersionPath, Args())

O próximo passo é atualizar o feed RSS para refletir as mudanças. Primeiro, a macro abre o arquivo RSS.odt e notifica o usuário para que ele entre com uma descrição das mudanças.

  ThisDoc=StarDesktop.loadComponentFromURL(RSSFile, "_blank", 0, Array())

  ChangesDescription=InputBox("Summary of changes", "Enter a brief description of changes" , "")

Usando as informações fornecidas, a macro então tem que gerar uma nova entrada RSS e a inserir no arquivo RSS.odt. O último passo é um pouco mais complicado, pois a nova entrada tem que ser adicionada antes das tags . Uma forma de resolver esse problema é usar uma rotina de busca e substituição para encontrar a tag e a substituir pela nova entrada RSS seguida por . Outro problema é que a rotina padrão de busca e substituição do OOoBasic ignora quebras de linhas definidas pelo código CHR(13). Isso quer dizer que o feed RSS inteiro será adicionado como uma linha. Embora isso não faça diferença na análise do RSS por parsers, isso o torna mais complexo de ser lido. Felizmente, existe uma forma simples de contornar o problema, que é usar expressões regulares e usar o código \n para inserir as quebras de linha. O bloco de código final para busca e substituição irá parecer-se com algo assim.

  RSSEnd="</channel>"

  NewRSSItem=Chr(13) & "<item>n <title>"& FileName & "</title>n <description>" & ChangesDescription &_

  "</description>n <guid>" & VersionPath & "</guid>n </item>nn</channel>"

  ThisDoc=ThisComponent

  ObjSearch=ThisDoc.createReplaceDescriptor

  ObjSearch.SearchString=RSSEnd

  ObjSearch.ReplaceString=NewRSSItem

  ObjSearch.SearchWords=true

  ObjSearch.SearchRegularExpression=true

  nReplace=ThisDoc.ReplaceAll(ObjSearch)

A macro está praticamente pronta; basta agora salvar o documento RSS.odt, então salvá-lo como um arquivo XML, e fechá-lo para deixar tudo certo:

  ThisDoc=ThisComponent

  ThisDoc.Store

  Args(0).Name="FilterName"

  Args(0).Value="Text"

  ThisDoc.StoreAsURL (RSSPath & RSSXMLFile, Args())

  ThisDoc.Close(True)

  End Sub

E é isso: uma solução caseira de controle de versões está pronta para ser publicada. Mova o documento RSS.odt para a localização adequada, tenha certeza que todos os caminhos para a macro estão corretos e comece a usá-lo. Outros usuários então poderão assinar o feed RSS gerado e manter-se informados sobre as mudanças no documento.

Dmitri Popov é um escritor freelancer cujos artigos aparecem em revistas de informática na Rússia, Inglaterra, Estados Unidos, Alemanha e Holanda.

Powered by ScribeFire.

Debian no Notebook Mirax mm6610

Já faz algum tempo em que não escrevo nada relacionado diretamente a Linux e ao Debian. Isso porque de certa forma fiquei sem nada interessante para escrever.
Porém, recentemente precisei adquirir um segundo computador para a casa. Como trabalho muito e ocasionalmente viajo, achei que um Notebook poderia ser uma boa idéia. No caso, adquiri no Extra um Notebook marca Mirax modelo MM6610. A configuração dessa máquina é a seguinte:

• Principais características:
• Processador: Intel® Core™ 2 Duo T5500 1,66
• Memória RAM: 1GB DDR2 533 MHz SO-DIMM – 2 SLOTS (Máx: 2 GB)
• HD de 80GB PATA – 5400 RPM
• Drive óptico: DVD-RW (gravador e leitor de CD e DVD) Dual Layer
• Leitor de cartões de memória: SD/ MMC/ MC/ MSPRO
• Teclado ABNT II
• Mouse: Touch Pad
• Web Cam: 1.3 megapixels (integrada)
• Placa de vídeo: Intel GMA945
• Placa de som: Realtek 882 – 2 speakers (1.5W)
• Placa de fax/modem: 56Kbps
• Placa de rede Ethernet: 10/100/1000 Gigabit Ethernet
• Placa mãe: MSI MS1034 – CHIPSET: Intel 945GM + ICH7-M with 667MHz FSB
• Wi-Fi: Wireless 802.11 b/g
• Sistema Operacional: Windows® Vista® Home Premium
• Display
• Tamanho da Tela: 15.4″      
• Resolução do Display: WXGA (1280×800)
• Conexões:
• Entradas USB: 4 portas USB 2.0 (2 de cada lado)
• Entrada FireWire: IEEE 1394
• Entrada PCMCIA: PCMCIA 2.1, Type II x 1
• Especificações técnicas         
• Bateria recarregável: 6 células (4400mAh)      
• Fonte de Alimentação: 19VDC 3,42A      
• Dimensões do produto (LxAxP): 2,7 ~ 3,3 x 35,8 x 25,9 cm      
• Peso do produto: 2.8Kg

Claro que, apesar de ter vindo a licença, eu é que não fui infeliz de usar o Windows Vista. No caso, optei por equipar meu laptop com um Debian Etch 4.0 estável. A parte boa é que quase todo o hardware foi detectado de primeira, incluindo aí também questões como rede (roteada por um Roteador Bright Wireless, pegando tanto a interface Ethernet quanto a rede Wireless). A ruim é que houve algumas coisas que não funcionaram.
Vamos fazer então uma lista do que funcionou ou não e o que demandou algum “extra”:

• CPU: Funcionou de primeira;
• Vídeo: Pegou de primeira, com o driver i810, mas não consegui ativar Beryl, Compiz ou afins, apesar de todos os resultados dos glxgears ou glxinfo. Qualquer tentativa de rodar games 3D, como Penguin Racer, OpenArena ou TORCS provocam o travamento do hardware após um período de tempo aleatório;
• Gravador de DVDs: Funcionou tranquilamente, embora o gravador OptiArc tenha alguns problemas para gravar DVDs, mas creio que isso é habitual em Laptops. Não testei a gravação de DVDs Dual Layer por falta de mídia;
• Acesso a Hardware Externo USB:  Possuo uma combinação bastante sortida de pendrives e MP3 players e também uma câmera digital Sony DSC-W30 6 Megapixel e todos foram devidamente detectados pelo Laptop. Não fiz testes com a câmera digital usando o recurso PhotoBrigde pelo digikam;
• Rede: ambas as interfaces levantaram normalmente. Fiz um teste durante uma viagem para interceptar hotspots em aeroportos e afins e foi tudo ok. Existem alguns detalhes dos quais falarei mais adiante;
• Som: O grande drama, falarei sobre ele mais adiante;
• Leitor de Cartões: Não funcionou;
• Webcam: Não funcionou;
• Firewire: Não testado;
• Bluetooth: Não testado;

As características mais interessantes do hardware específicamente são o bom LCD 14,1″, bem claro e suficientemente luminoso, o leitor e gravador de DVDs bastante eficiente (apesar de um certo problema com gravação de mídias, que creio ser algo padrão no Linux) e as caixas de som internas que são bastante boas, apesar de caixas de som externas serem recomendáveis.
Agora, vamos aos comentários sobre a instalação.

• Som

O Som foi a primeira coisa a “dar pau”. Na verdade não que tenha “dado pau”, mas sim que houve um problema por causa do driver Intel HDA vindo no ALSA que consta do Debian Etch, que impedia o correto jack detection (detecção da conexão do fone de ouvido na saída dele no laptop) e o desativamento do mesmo após a conexão. Recentemente o Debian atualizou o ALSA padrão, mas precisei de qualquer modo compilar o ALSA, o que acabou a me levar a compilar o Kernel, o que fiz seguindo as sugestões do site HowToForge. Algumas sugestões pessoais ao fazer isso são:

• Compile o Kernel tendo embutido o seu filesystem root (/) e drivers para seu disco rígido (sugestão para usuários de disco Serial ATA: ativem o Generic SATA Driver como builtin). Sem isso, não adianta nem tentar bootar que você vai sofrer um kernel panic;
• Use a versão baixada do kernel.org. Embora alguns puristas possam achar ruim isso, sempre aconselhando o uso do pacote kernel-sources, eu não percebi diferença nenhuma.
• Não remova o kernel padrão do sistema. Por incrível que possa parecer, esse é um erro comum, que é sobrepor o kernel padrão do Debian pelo kernel customizado. A chance de você precisar reinstalar tudo é bem grande;
• Instale os utilitários para compilação de kernel do Debian, principalmente o make-kpkg. Isso ajuda bastante no caso da instalação dos kernels no Debian;
• Os kernels padrões na maioria das distros e do Debian em especial, ao serem instalados, gravam dentro de /boot, um arquivo chamado config-. Esse arquivo mantêm as configurações de compilação daquele kernel. Utilize essas configurações padrão como ponto de partida;
• Usando o make-kpkg você fica com maior facilidade na instalação do Kernel e na configuração do mesmo, inclusive na criação do initrd (Initial Ram Disk) e afins. Use-o!
• Se você precisar instalar ALSA, mantenha apenas ativo Sound Support e remova inclusive o ALSA do kernel do Linux. Esse suporte será implementado pelo próprio ALSA;

Depois de compilado o kernel, compilei o ALSA 1.0.14 direto do site e instalei-o usando sempre que possível pacotes .deb gerados por mim (algumas partes tiveram que ser instaladas com make install). Instalados ambos, após um reboot, o problema inverteu-se: as caixas de som perderam o áudio, tendo áudio apenas pela saída do fone de ouvido. O problema aqui era um ajuste na carga do driver ALSA. No caso, foi necessário adicionar a linha “options snd-hda-intel model=targa-2ch-dig” no arquivo /etc/modprobe.d/alsa-drivers. Depois disso, os ajustes de volume de áudio ficaram em Front e o sistema funcionou muito bem.

• Vídeo

O driver de vídeo do Laptop é um “Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller“, conforme retornado pelo lspci. Em teoria, isso quer dizer que, com o uso do driver i810 do X.org, seria possível o uso de aceleração gráfica, ou seja, além de jogar jogos 3D como TORCS, Penguin Racer e OpenArena, seria possível usar-se Beryl ou Compiz para eye-candys 3D. Seguindo orientações como a desse artigo do blog “Where I can Finally be calm…” e essa do site VivaOLinux, tentei configurar o meu X para aceitar o Beryl. Instalei também todos os pacotes e, após ativar o Beryl, começaram os problemas: inicialmente perdi todas as decorações da janela. Além disso, e esse segundo problema ocorreu inclusive com Games 3D no Linux, meu sistema trava após um período aleatório de tempo. Tentei inclusive modificar meu /etc/X11/xorg.conf, incluindo uma diretriz VideoRam que poderia forçar o aumento da memória gráfica, mas tudo o que consegui foi piorar a performance do vídeo. Mantive a configuração com o VideoRam desativado e a performance voltou ao normal em 2D, com todos os games rodando com uma boa performance. Abaixo alguns snapshots.

• Instalações extras
  

Algumas instalações foram feitas fora do “padrão” do Debian. No caso, foram instalados BrOffice.org, Java, Flash, CGoban 3 (cliente para à Kiseido Go Server) Mozilla Thunderbird (instalado no Debian como Icedove) e Mozilla Firefox, embora o Firefox venha instalado no Debian como IceWeasel por motivos de Marca Registrada. No caso, a instalação do Thunderbird e do Firefox foram tranqüilas, apenas descompactando os binários baixados do site da Mozilla no /opt. O BrOffice.org foi instalado conforme descrito em um artigo anterior meu usando a dica do Hamacker, adaptada para a nova versão do BrOffice.org, a 2.2.1, reintegrada ao codebase do OpenOffice.org original. Seguindo a mesma idéia desse artigo do meu blog, configurei o JDK 6.0 + Netbeans 5.5, e seguindo uma adaptação desse artigo da VivaOLinux para ativar o Java no Firefox.
O CGoban 3 foi razoavelmente fácil de ser instalado: uma vez instalado e configurando o Java como dito anteriorente, abra o terminal e use o comando “javaws http://files.gokgs.com/javaBin/cgoban.jnlp“. O próprio Java Web Start irá copiar e instalar o CGoban 3 por conta própria. Existe uma opção de instalação que não se associa à extensão .sgf (Smart Go File), formato de gravação de arquivos de jogos de Go. No caso, para mais informações sobre isso, entre no site da KGS.
Para instalar o Flash e o configurar no Firefox, não é muito difícil: pegue o plugin no site da Adobe. No caso do Debian, é melhor (pelo menos eu acho) usar o plugin em .tar.gz. Uma vez copiado o arquivo, abra um Terminal, descompacte-o em algum diretório e passe para root. Vá à pasta onde você descompactou o arquivo da Adobe e chame o instalador do Flash com o comando “./flashplayer-installer“. Confirme a instalação com Enter e aperte Enter novamente. Em seguida, informe a pasta do Firefox (no meu caso, /opt/firefox) e confirme com y a instalação. Se quiser (e tiver navegadores compatíveis), você pode instalar os plugins do Flash em outros navegadores, como o Konqueror, Epiphany, Iceweasel ou SeaMonkey (IceApe).

• Do Etch para o Lenny
  

A passagem de Debian Etch para Debian Lenny (atual versão testing) é uma boa idéia apenas se sua estação de trabalho não precisar ser mantida estável. No meu caso, meu laptop é usado apenas por mim. De qualquer modo, isso é questão de opção pessoal. Para o fazer, copie um backup de seu /etc/apt/sources.list. Com seu editor favorito (no meu caso o emacs) modifique as entradas de stable para testing e de etch para lenny. Rode o apt-get update. Se houver alguma falha, verifique as fontes e modifique as entradas falhas de volta ao original (ou seja, de testing para stable e de lenny para etch) e reexecute o comando apt-get update. Assim que ele carregar corretamente todas as informações de repositório, rode apt-get -y dist-upgrade. Isso irá atualizar toda a sua distro. Aguarde que o download será intenso. Após o término e instalação dos pacotes .deb (durante os quais ele poderá pedir informações adicionais, abrindo janelas curses para pedido de configuração como de costume no Debian), reinicie o laptop. Seu Debian deverá ser já um Lenny.

• Arquivos e retornos de comandos para análise
  

Estou anexando aqui alguns arquivos e retornos de comandos como lspci, lsmod, dmesg e afins para os interessados:

• lspci -vvv

00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)

    Subsystem: Micro-Star International Co., Ltd. Unknown device 0341

    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-

    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- 

    Latency: 0

    Capabilities: [e0] Vendor Specific Information

00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03) (prog-if 00 [VGA])

    Subsystem: Micro-Star International Co., Ltd. Unknown device 0341

    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-

    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- 

    Latency: 0

    Interrupt: pin A routed to IRQ 16

    Region 0: Memory at ffe80000 (32-bit, non-prefetchable) [size=512K]

    Region 1: I/O ports at ec00 [size=8]

    Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]

    Region 3: Memory at ffe40000 (32-bit, non-prefetchable) [size=256K]

    Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-

        Address: 00000000  Data: 0000

    Capabilities: [d0] Power Management version 2

        Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)

        Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)

    Subsystem: Micro-Star International Co., Ltd. Unknown device 0341

    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-

    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- 

    Region 0: Memory at 40000000 (32-bit, non-prefetchable) [disabled] [size=512K]

    Capabilities: [d0] Power Management version 2

        Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)

        Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)

    Subsystem: Micro-Star International Co., Ltd. Unknown device 0349

    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-

    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 

    Latency: 0, Cache Line Size: 32 bytes

    Interrupt: pin A routed to IRQ 16

    Region 0: Memory at ffe3c000 (64-bit, non-prefetchable) [size=16K]

    Capabilities: [50] Power Management version 2

        Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)

        Status: D0 PME-Enable- DSel=0 DScale=0 PME-

    Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-

        Address: 0000000000000000  Data: 0000

    Capabilities: [70] Express Unknown type IRQ 0

        Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-

        Device: Latency L0s <64ns, L1 <1us

        Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-

        Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+

        Device: MaxPayload 128 bytes, MaxReadReq 128 bytes

        Link: Supported Speed unknown, Width x0, ASPM unknown, Port 0

        Link: Latency L0s <64ns, L1 <1us

        Link: ASPM Disabled CommClk- ExtSynch-

        Link: Speed unknown, Width x0

00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02) (prog-if 00 [Normal decode])

    Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-

    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 

    Latency: 0, Cache Line Size: 32 bytes

    Bus: primary=00, secondary=01, subordinate=01, sec-latency=0

    I/O behind bridge: 0000f000-00000fff

    Memory behind bridge: fff00000-000fffff

    Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff

    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- 

    BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-

    Capabilities: [40] Express Root Port (Slot-) IRQ 0

        Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-

        Device: Latency L0s unlimited, L1 unlimited

        Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+

        Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-

        Device: MaxPayload 128 bytes, MaxReadReq 128 bytes

        Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 1

        Link: Latency L0s <256ns, L1 <4us

        Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-

        Link: Speed 2.5Gb/s, Width x0

        Root: Correctable- Non-Fatal- Fatal- PME-

    Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+

        Address: fee0300c  Data: 41c1

    Capabilities: [90] Subsystem: Micro-Star International Co., Ltd. Unknown device 0341

    Capabilities: [a0] Power Management version 2

        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)

        Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02) (prog-if 00 [Normal decode])

    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-

    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 

    Latency: 0, Cache Line Size: 32 bytes

    Bus: primary=00, secondary=02, subordinate=02, sec-latency=0

    I/O behind bridge: 0000c000-0000cfff

    Memory behind bridge: ff200000-ff2fffff

    Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff

    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- 

    BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-

    Capabilities: [40] Express Root Port (Slot+) IRQ 0

        Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-

        Device: Latency L0s unlimited, L1 unlimited

        Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+

        Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-

        Device: MaxPayload 128 bytes, MaxReadReq 128 bytes

        Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 2

        Link: Latency L0s <256ns, L1 <4us

        Link: ASPM L0s L1 Enabled RCB 64 bytes CommClk+ ExtSynch-

        Link: Speed 2.5Gb/s, Width x1

        Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+

        Slot: Number 0, PowerLimit 0.000000

        Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-

        Slot: AttnInd Unknown, PwrInd Unknown, Power-

        Root: Correctable- Non-Fatal- Fatal- PME-

    Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+

        Address: fee0300c  Data: 41c9

    Capabilities: [90] Subsystem: Micro-Star International Co., Ltd. Unknown device 0341

    Capabilities: [a0] Power Management version 2

        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)

        Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02) (prog-if 00 [Normal decode])

    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-

    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 

    Latency: 0, Cache Line Size: 32 bytes

    Bus: primary=00, secondary=03, subordinate=03, sec-latency=0

    I/O behind bridge: 0000f000-00000fff

    Memory behind bridge: ff300000-ff3fffff

    Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff

    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- 

    BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-

    Capabilities: [40] Express Root Port (Slot+) IRQ 0

        Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-

        Device: Latency L0s unlimited, L1 unlimited

        Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+

        Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-

        Device: MaxPayload 128 bytes, MaxReadReq 128 bytes

        Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 3

        Link: Latency L0s <256ns, L1 <4us

        Link: ASPM L1 Enabled RCB 64 bytes CommClk+ ExtSynch-

        Link: Speed 2.5Gb/s, Width x1

        Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+

        Slot: Number 0, PowerLimit 0.000000

        Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-

        Slot: AttnInd Unknown, PwrInd Unknown, Power-

        Root: Correctable- Non-Fatal- Fatal- PME-

    Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+

        Address: fee0300c  Data: 41d1

    Capabilities: [90] Subsystem: Micro-Star International Co., Ltd. Unknown device 0341

    Capabilities: [a0] Power Management version 2

        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)

        Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02) (prog-if 00 [UHCI])

    Subsystem: Micro-Star International Co., Ltd. Unknown device 0341

    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-

    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- 

    Latency: 0

    Interrupt: pin A routed to IRQ 20

    Region 4: I/O ports at e880 [size=32]

00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02) (prog-if 00 [UHCI])

    Subsystem: Micro-Star International Co., Ltd. Unknown device 0341

    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-

    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- 

    Latency: 0

    Interrupt: pin B routed to IRQ 19

    Region 4: I/O ports at e800 [size=32]

00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02) (prog-if 00 [UHCI])

    Subsystem: Micro-Star International Co., Ltd. Unknown device 0341

    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-

    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- 

    Latency: 0

    Interrupt: pin C routed to IRQ 18

    Region 4: I/O ports at e480 [size=32]

00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02) (prog-if 00 [UHCI])

    Subsystem: Micro-Star International Co., Ltd. Unknown device 0341

    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-

    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- 

    Latency: 0

    Interrupt: pin D routed to IRQ 16

    Region 4: I/O ports at e400 [size=32]

00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02) (prog-if 20 [EHCI])

    Subsystem: Micro-Star International Co., Ltd. Unknown device 0341

    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-

    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- 

    Latency: 0

    Interrupt: pin A routed to IRQ 20

    Region 0: Memory at ffe3bc00 (32-bit, non-prefetchable) [size=1K]

    Capabilities: [50] Power Management version 2

        Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)

        Status: D0 PME-Enable- DSel=0 DScale=0 PME-

    Capabilities: [58] Debug port

00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) (prog-if 01 [Subtractive decode])

    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-

    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 

    Latency: 0

    Bus: primary=00, secondary=04, subordinate=08, sec-latency=32

    I/O behind bridge: 0000d000-0000dfff

    Memory behind bridge: ff400000-ffcfffff

    Prefetchable memory behind bridge: 00000000bdf00000-00000000bfefffff

    Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- 

    BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-

    Capabilities: [50] Subsystem: Micro-Star International Co., Ltd. Unknown device 0341

00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)

    Subsystem: Micro-Star International Co., Ltd. Unknown device 0341

    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-

    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- 

    Latency: 0

    Capabilities: [e0] Vendor Specific Information

00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 02) (prog-if 80 [Master])

    Subsystem: Micro-Star International Co., Ltd. Unknown device 0341

    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-

    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- 

    Latency: 0

    Interrupt: pin B routed to IRQ 19

    Region 0: I/O ports at 01f0 [size=8]

    Region 1: I/O ports at 03f4 [size=1]

    Region 2: I/O ports at 0170 [size=8]

    Region 3: I/O ports at 0374 [size=1]

    Region 4: I/O ports at ffa0 [size=16]

    Capabilities: [70] Power Management version 2

        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)

        Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)

    Subsystem: Micro-Star International Co., Ltd. Unknown device 0341

    Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-

    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- 

    Interrupt: pin B routed to IRQ 19

    Region 4: I/O ports at 0400 [size=32]

02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01)

    Subsystem: Micro-Star International Co., Ltd. Unknown device 0341

    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-

    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 

    Latency: 0, Cache Line Size: 32 bytes

    Interrupt: pin A routed to IRQ 17

    Region 0: I/O ports at c800 [size=256]

    Region 2: Memory at ff2ff000 (64-bit, non-prefetchable) [size=4K]

    Expansion ROM at ff2e0000 [disabled] [size=64K]

    Capabilities: [40] Power Management version 2

        Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)

        Status: D0 PME-Enable- DSel=0 DScale=0 PME-

    Capabilities: [48] Vital Product Data

    Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable-

        Address: 0000000000000000  Data: 0000

    Capabilities: [60] Express Endpoint IRQ 0

        Device: Supported: MaxPayload 1024 bytes, PhantFunc 0, ExtTag-

        Device: Latency L0s unlimited, L1 unlimited

        Device: AtnBtn+ AtnInd+ PwrInd+

        Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-

        Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+

        Device: MaxPayload 128 bytes, MaxReadReq 512 bytes

        Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 0

        Link: Latency L0s unlimited, L1 unlimited

        Link: ASPM L0s Enabled RCB 64 bytes CommClk+ ExtSynch-

        Link: Speed 2.5Gb/s, Width x1

    Capabilities: [84] Vendor Specific Information

03:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)

    Subsystem: Intel Corporation Unknown device 1001

    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-

    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 

    Latency: 0, Cache Line Size: 32 bytes

    Interrupt: pin A routed to IRQ 18

    Region 0: Memory at ff3ff000 (32-bit, non-prefetchable) [size=4K]

    Capabilities: [c8] Power Management version 2

        Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)

        Status: D0 PME-Enable- DSel=0 DScale=0 PME-

    Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-

        Address: 0000000000000000  Data: 0000

    Capabilities: [e0] Express Legacy Endpoint IRQ 0

        Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-

        Device: Latency L0s <512ns, L1 unlimited

        Device: AtnBtn- AtnInd- PwrInd-

        Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-

        Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+

        Device: MaxPayload 128 bytes, MaxReadReq 128 bytes

        Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 0

        Link: Latency L0s <128ns, L1 <64us

        Link: ASPM L1 Enabled RCB 64 bytes CommClk+ ExtSynch-

        Link: Speed 2.5Gb/s, Width x1

04:04.0 CardBus bridge: O2 Micro, Inc. OZ711MP1/MS1 MemoryCardBus Controller (rev 21)

    Subsystem: Micro-Star International Co., Ltd. Unknown device 0341

    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-

    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- SERR- 

    Latency: 168

    Interrupt: pin A routed to IRQ 16

    Region 0: Memory at ff400000 (32-bit, non-prefetchable) [size=4K]

    Bus: primary=04, secondary=05, subordinate=08, sec-latency=176

    Memory window 0: 44000000-47fff000 (prefetchable)

    Memory window 1: 48000000-4bfff000

    I/O window 0: 0000d000-0000d0ff

    I/O window 1: 0000d400-0000d4ff

    BridgeCtl: Parity+ SERR+ ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+

    16-bit legacy interface ports at 0001

04:04.2 Generic system peripheral [0805]: O2 Micro, Inc. Integrated MMC/SD Controller (rev 01)

    Subsystem: Micro-Star International Co., Ltd. Unknown device 0341

    Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-

    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- SERR- 

    Interrupt: pin A routed to IRQ 16

    Region 0: Memory at ffcffc00 (32-bit, non-prefetchable) [size=256]

    Capabilities: [a0] Power Management version 2

        Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)

        Status: D0 PME-Enable- DSel=0 DScale=0 PME-

04:04.3 Bridge: O2 Micro, Inc. Integrated MS/xD Controller (rev 01)

    Subsystem: Micro-Star International Co., Ltd. Unknown device 0341

    Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-

    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- SERR- 

    Interrupt: pin A routed to IRQ 10

    Region 0: Memory at ffcfe000 (32-bit, non-prefetchable) [size=4K]

    Capabilities: [a0] Power Management version 2

        Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)

        Status: D0 PME-Enable- DSel=0 DScale=0 PME-

04:04.4 FireWire (IEEE 1394): O2 Micro, Inc. Firewire (IEEE 1394) (rev 02) (prog-if 10 [OHCI])

    Subsystem: O2 Micro, Inc. Firewire (IEEE 1394)

    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-

    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- 

    Latency: 64, Cache Line Size: 32 bytes

    Interrupt: pin A routed to IRQ 16

    Region 0: Memory at ffcfd000 (32-bit, non-prefetchable) [size=4K]

    Region 1: Memory at ffcff000 (32-bit, non-prefetchable) [size=2K]

    Capabilities: [60] Power Management version 2

        Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)

        Status: D0 PME-Enable- DSel=0 DScale=0 PME+

• dmesg:

Linux version 2.6.21.3 (root@hufflepuff) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #5 SMP Thu Jun 7 15:12:57 BRT 2007

BIOS-provided physical RAM map:

sanitize start

sanitize end

copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1

copy_e820_map() type is E820_RAM

copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2

copy_e820_map() start: 00000000000e0000 size: 0000000000020000 end: 0000000000100000 type: 2

copy_e820_map() start: 0000000000100000 size: 000000003f6d0000 end: 000000003f7d0000 type: 1

copy_e820_map() type is E820_RAM

copy_e820_map() start: 000000003f7d0000 size: 000000000000e000 end: 000000003f7de000 type: 3

copy_e820_map() start: 000000003f7de000 size: 0000000000022000 end: 000000003f800000 type: 4

copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2

copy_e820_map() start: 00000000fff80000 size: 0000000000080000 end: 0000000100000000 type: 2

 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)

 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)

 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)

 BIOS-e820: 0000000000100000 - 000000003f7d0000 (usable)

 BIOS-e820: 000000003f7d0000 - 000000003f7de000 (ACPI data)

 BIOS-e820: 000000003f7de000 - 000000003f800000 (ACPI NVS)

 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)

 BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)

119MB HIGHMEM available.

896MB LOWMEM available.

found SMP MP-table at 000ff780

NX (Execute Disable) protection: active

Entering add_active_range(0, 0, 260048) 0 entries of 256 used

Zone PFN ranges:

  DMA             0 ->     4096

  Normal       4096 ->   229376

  HighMem    229376 ->   260048

early_node_map[1] active PFN ranges

    0:        0 ->   260048

On node 0 totalpages: 260048

  DMA zone: 32 pages used for memmap

  DMA zone: 0 pages reserved

  DMA zone: 4064 pages, LIFO batch:0

  Normal zone: 1760 pages used for memmap

  Normal zone: 223520 pages, LIFO batch:31

  HighMem zone: 239 pages used for memmap

  HighMem zone: 30433 pages, LIFO batch:7

DMI 2.3 present.

ACPI: RSDP 000F8730, 0014 (r0 MSI   )

ACPI: RSDT 3F7D0000, 0038 (r1 MSI    1034     11152006 MSFT       97)

ACPI: FACP 3F7D0200, 0084 (r2 MSI    1034     11152006 MSFT       97)

ACPI Warning (tbfadt-0360): Ignoring BIOS FADT r2 C-state control [20070126]

ACPI: DSDT 3F7D0430, 403E (r1 MSI    1034     11152006 INTL  2002026)

ACPI: FACS 3F7DE000, 0040

ACPI: APIC 3F7D0390, 005C (r1 MSI    OEMAPIC  11152006 MSFT       97)

ACPI: MCFG 3F7D03F0, 003C (r1 MSI    OEMMCFG  11152006 MSFT       97)

ACPI: OEMB 3F7DE040, 0046 (r1 MSI    AMI_OEM  11152006 MSFT       97)

ACPI: ASF! 3F7D4470, 0075 (r32 LEGEND I865PASF        1 INTL  2002026)

ACPI: PM-Timer IO Port: 0x808

ACPI: Local APIC address 0xfee00000

ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)

Processor #0 6:15 APIC version 20

ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)

Processor #1 6:15 APIC version 20

ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])

IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23

ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)

ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)

ACPI: IRQ0 used by override.

ACPI: IRQ2 used by override.

ACPI: IRQ9 used by override.

Enabling APIC mode:  Flat.  Using 1 I/O APICs

Using ACPI (MADT) for SMP configuration information

Allocating PCI resources starting at 40000000 (gap: 3f800000:bf600000)

Built 1 zonelists.  Total pages: 258017

Kernel command line: root=/dev/sda1 ro 

mapped APIC to ffffd000 (fee00000)

mapped IOAPIC to ffffc000 (fec00000)

Enabling fast FPU save and restore... done.

Enabling unmasked SIMD FPU exception support... done.

Initializing CPU#0

PID hash table entries: 4096 (order: 12, 16384 bytes)

Detected 1666.934 MHz processor.

Console: colour VGA+ 80x25

Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)

Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)

Memory: 1021612k/1040192k available (2022k kernel code, 17832k reserved, 781k data, 212k init, 122688k highmem)

virtual kernel memory layout:

    fixmap  : 0xffe17000 - 0xfffff000   (1952 kB)

    pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)

    vmalloc : 0xf8800000 - 0xffbfe000   ( 115 MB)

    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)

      .init : 0xc03c4000 - 0xc03f9000   ( 212 kB)

      .data : 0xc02f9bc1 - 0xc03bd3b4   ( 781 kB)

      .text : 0xc0100000 - 0xc02f9bc1   (2022 kB)

Checking if this processor honours the WP bit even in supervisor mode... Ok.

Calibrating delay using timer specific routine.. 3336.94 BogoMIPS (lpj=6673899)

Security Framework v1.0.0 initialized

SELinux:  Disabled at boot.

Capability LSM initialized

Mount-cache hash table entries: 512

CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001

monitor/mwait feature present.

using mwait in idle threads.

CPU: L1 I cache: 32K, L1 D cache: 32K

CPU: L2 cache: 2048K

CPU: Physical Processor ID: 0

CPU: Processor Core ID: 0

CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e39d 00000000 00000001

Intel machine check architecture supported.

Intel machine check reporting enabled on CPU#0.

Compat vDSO mapped to ffffe000.

Checking 'hlt' instruction... OK.

SMP alternatives: switching to UP code

ACPI: Core revision 20070126

CPU0: Intel(R) Core(TM)2 CPU         T5500  @ 1.66GHz stepping 06

SMP alternatives: switching to SMP code

Booting processor 1/1 eip 3000

Initializing CPU#1

Calibrating delay using timer specific routine.. 3333.87 BogoMIPS (lpj=6667748)

CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001

monitor/mwait feature present.

CPU: L1 I cache: 32K, L1 D cache: 32K

CPU: L2 cache: 2048K

CPU: Physical Processor ID: 0

CPU: Processor Core ID: 1

CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e39d 00000000 00000001

Intel machine check architecture supported.

Intel machine check reporting enabled on CPU#1.

CPU1: Intel(R) Core(TM)2 CPU         T5500  @ 1.66GHz stepping 06

Total of 2 processors activated (6670.82 BogoMIPS).

ENABLING IO-APIC IRQs

..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1

checking TSC synchronization [CPU#0 -> CPU#1]: passed.

Brought up 2 CPUs

migration_cost=39

NET: Registered protocol family 16

ACPI: bus type pci registered

PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved

PCI: Not using MMCONFIG.

PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5

PCI: Using configuration type 1

Setting up standard PCI resources

ACPI: Interpreter enabled

ACPI: (supports S0 S1 S3 S4 S5)

ACPI: Using IOAPIC for interrupt routing

ACPI: PCI Root Bridge [PCI0] (0000:00)

PCI: Probing PCI hardware (bus 00)

Boot video device is 0000:00:02.0

PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO

PCI quirk: region 0480-04bf claimed by ICH6 GPIO

PCI: Transparent bridge - 0000:00:1e.0

PCI: Bus #05 (-#08) is hidden behind transparent bridge #04 (-#05) (try 'pci=assign-busses')

Please report the result to linux-kernel to fix this permanently

ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]

ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]

ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]

ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]

ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)

ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)

ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)

ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 10 11 12 14 15)

ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.

ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.

ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.

ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)

Linux Plug and Play Support v0.97 (c) Adam Belay

pnp: PnP ACPI init

pnp: PnP ACPI: found 12 devices

PnPBIOS: Disabled by ACPI PNP

SCSI subsystem initialized

libata version 2.20 loaded.

PCI: Using ACPI for IRQ routing

PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report

NET: Registered protocol family 8

NET: Registered protocol family 20

pnp: 00:01: iomem range 0xfed13000-0xfed19fff has been reserved

pnp: 00:08: iomem range 0xfff80000-0xffffffff could not be reserved

pnp: 00:08: iomem range 0xffb80000-0xffcfcfff has been reserved

pnp: 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved

pnp: 00:08: iomem range 0xfed20000-0xfed8ffff has been reserved

pnp: 00:09: iomem range 0xfec00000-0xfec00fff has been reserved

pnp: 00:09: iomem range 0xfee00000-0xfee00fff could not be reserved

pnp: 00:0a: iomem range 0xe0000000-0xe3ffffff has been reserved

pnp: 00:0b: iomem range 0x0-0x9ffff could not be reserved

pnp: 00:0b: iomem range 0xc0000-0xcffff could not be reserved

pnp: 00:0b: iomem range 0xe0000-0xfffff could not be reserved

pnp: 00:0b: iomem range 0x100000-0x3f7fffff could not be reserved

Time: tsc clocksource has been installed.

PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0

PCI: Bridge: 0000:00:1c.0

  IO window: disabled.

  MEM window: disabled.

  PREFETCH window: disabled.

PCI: Bridge: 0000:00:1c.1

  IO window: c000-cfff

  MEM window: ff200000-ff2fffff

  PREFETCH window: disabled.

PCI: Bridge: 0000:00:1c.2

  IO window: disabled.

  MEM window: ff300000-ff3fffff

  PREFETCH window: disabled.

PCI: Bus 5, cardbus bridge: 0000:04:04.0

  IO window: 0000d000-0000d0ff

  IO window: 0000d400-0000d4ff

  PREFETCH window: 44000000-47ffffff

  MEM window: 48000000-4bffffff

PCI: Bridge: 0000:00:1e.0

  IO window: d000-dfff

  MEM window: ff400000-ffcfffff

  PREFETCH window: bdf00000-bfefffff

ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16

PCI: Setting latency timer of device 0000:00:1c.0 to 64

ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17

PCI: Setting latency timer of device 0000:00:1c.1 to 64

ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18

PCI: Setting latency timer of device 0000:00:1c.2 to 64

PCI: Setting latency timer of device 0000:00:1e.0 to 64

ACPI: PCI Interrupt 0000:04:04.0[A] -> GSI 16 (level, low) -> IRQ 16

NET: Registered protocol family 2

IP route cache hash table entries: 32768 (order: 5, 131072 bytes)

TCP established hash table entries: 131072 (order: 8, 1572864 bytes)

TCP bind hash table entries: 65536 (order: 7, 524288 bytes)

TCP: Hash tables configured (established 131072 bind 65536)

TCP reno registered

checking if image is initramfs... it is

Freeing initrd memory: 5514k freed

audit: initializing netlink socket (disabled)

audit(1184426659.084:1): initialized

highmem bounce pool size: 64 pages

VFS: Disk quotas dquot_6.5.1

Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

io scheduler noop registered

io scheduler anticipatory registered

io scheduler deadline registered

io scheduler cfq registered (default)

PCI: Setting latency timer of device 0000:00:1c.0 to 64

assign_interrupt_mode Found MSI capability

Allocate Port Service[0000:00:1c.0:pcie00]

PCI: Setting latency timer of device 0000:00:1c.1 to 64

assign_interrupt_mode Found MSI capability

Allocate Port Service[0000:00:1c.1:pcie00]

Allocate Port Service[0000:00:1c.1:pcie02]

PCI: Setting latency timer of device 0000:00:1c.2 to 64

assign_interrupt_mode Found MSI capability

Allocate Port Service[0000:00:1c.2:pcie00]

Allocate Port Service[0000:00:1c.2:pcie02]

isapnp: Scanning for PnP cards...

isapnp: No Plug & Play device found

Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled

RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize

ata_piix 0000:00:1f.2: version 2.10ac1

ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]

ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19

PCI: Setting latency timer of device 0000:00:1f.2 to 64

ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ffa0 irq 14

ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ffa8 irq 15

scsi0 : ata_piix

ata1.00: ATA-7: WDC WD800BEVS-60RST0, 04.01G04, max UDMA/100

ata1.00: 156301488 sectors, multi 16: LBA48 

ata1.00: configured for UDMA/100

scsi1 : ata_piix

ATA: abnormal status 0x7F on port 0x00010177

ATA: abnormal status 0x7F on port 0x00010177

ata2.01: ATAPI, max UDMA/33

ata2.01: configured for UDMA/33

scsi 0:0:0:0: Direct-Access     ATA      WDC WD800BEVS-60 04.0 PQ: 0 ANSI: 5

scsi 1:0:1:0: CD-ROM            Optiarc  DVD RW AD-7530A  EX32 PQ: 0 ANSI: 5

PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12

i8042.c: Detected active multiplexing controller, rev 1.1.

serio: i8042 KBD port at 0x60,0x64 irq 1

serio: i8042 AUX0 port at 0x60,0x64 irq 12

serio: i8042 AUX1 port at 0x60,0x64 irq 12

serio: i8042 AUX2 port at 0x60,0x64 irq 12

serio: i8042 AUX3 port at 0x60,0x64 irq 12

mice: PS/2 mouse device common for all mice

TCP bic registered

NET: Registered protocol family 1

NET: Registered protocol family 17

Starting balanced_irq

Using IPI No-Shortcut mode

Freeing unused kernel memory: 212k freed

input: AT Translated Set 2 keyboard as /class/input/input0

ACPI: SSDT 3F7D44F0, 0436 (r1    AMI   CPU1PM        1 INTL 20051117)

ACPI: CPU0 (power states: C1[C1] C2[C2])

ACPI Warning (tbutils-0158): Incorrect checksum in table [SSDT] -  30, should be F1 [20070126]

ACPI: SSDT 3F7D4930, 0436 (r1    AMI   CPU2PM        1 INTL 20051117)

ACPI: CPU1 (power states: C1[C1] C2[C2])

ACPI: Thermal Zone [THRM] (57 C)

SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)

sda: Write Protect is off

sda: Mode Sense: 00 3a 00 00

SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA

SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)

sda: Write Protect is off

sda: Mode Sense: 00 3a 00 00

SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA

 sda:<6>Time: acpi_pm clocksource has been installed.

 sda1 sda2 sda3

sd 0:0:0:0: Attached scsi disk sda

sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray

Uniform CD-ROM driver Revision: 3.20

sr 1:0:1:0: Attached scsi CD-ROM sr0

sd 0:0:0:0: Attached scsi generic sg0 type 0

sr 1:0:1:0: Attached scsi generic sg1 type 5

r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded

ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17

PCI: Setting latency timer of device 0000:02:00.0 to 64

eth0: RTL8168b/8111b at 0xf8840000, 00:19:db:3b:34:c6, IRQ 17

ieee1394: Initialized config rom entry `ip1394'

ACPI: PCI Interrupt 0000:04:04.4[A] -> GSI 16 (level, low) -> IRQ 16

usbcore: registered new interface driver usbfs

usbcore: registered new interface driver hub

usbcore: registered new device driver usb

ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16]  MMIO=[ffcfd000-ffcfd7ff]  Max Packet=[2048]  IR/IT contexts=[8/8]

USB Universal Host Controller Interface driver v3.0

ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20

PCI: Setting latency timer of device 0000:00:1d.0 to 64

uhci_hcd 0000:00:1d.0: UHCI Host Controller

uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1

uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000e880

usb usb1: configuration #1 chosen from 1 choice

hub 1-0:1.0: USB hub found

hub 1-0:1.0: 2 ports detected

ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19

PCI: Setting latency timer of device 0000:00:1d.1 to 64

uhci_hcd 0000:00:1d.1: UHCI Host Controller

uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2

uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e800

usb usb2: configuration #1 chosen from 1 choice

hub 2-0:1.0: USB hub found

hub 2-0:1.0: 2 ports detected

ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18

PCI: Setting latency timer of device 0000:00:1d.2 to 64

uhci_hcd 0000:00:1d.2: UHCI Host Controller

uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3

uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e480

usb usb3: configuration #1 chosen from 1 choice

hub 3-0:1.0: USB hub found

hub 3-0:1.0: 2 ports detected

ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16

PCI: Setting latency timer of device 0000:00:1d.3 to 64

uhci_hcd 0000:00:1d.3: UHCI Host Controller

uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4

uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e400

usb usb4: configuration #1 chosen from 1 choice

hub 4-0:1.0: USB hub found

hub 4-0:1.0: 2 ports detected

ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20

PCI: Setting latency timer of device 0000:00:1d.7 to 64

ehci_hcd 0000:00:1d.7: EHCI Host Controller

ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5

ehci_hcd 0000:00:1d.7: debug port 1

PCI: cache line size of 32 is not supported by device 0000:00:1d.7

ehci_hcd 0000:00:1d.7: irq 20, io mem 0xffe3bc00

ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004

usb usb5: configuration #1 chosen from 1 choice

hub 5-0:1.0: USB hub found

hub 5-0:1.0: 8 ports detected

md: linear personality registered for level -1

md: multipath personality registered for level -4

md: raid0 personality registered for level 0

md: raid1 personality registered for level 1

raid5: automatically using best checksumming function: pIII_sse

   pIII_sse  :  5999.000 MB/sec

raid5: using function: pIII_sse (5999.000 MB/sec)

raid6: int32x1    653 MB/s

usb 5-5: new high speed USB device using ehci_hcd and address 2

raid6: int32x2    637 MB/s

raid6: int32x4    545 MB/s

usb 5-5: configuration #1 chosen from 1 choice

raid6: int32x8    475 MB/s

raid6: mmxx1     2163 MB/s

raid6: mmxx2     2273 MB/s

raid6: sse1x1    1299 MB/s

raid6: sse1x2    1701 MB/s

raid6: sse2x1    2463 MB/s

raid6: sse2x2    2841 MB/s

raid6: using algorithm sse2x2 (2841 MB/s)

md: raid6 personality registered for level 6

md: raid5 personality registered for level 5

md: raid4 personality registered for level 4

md: raid10 personality registered for level 10

ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00dc1000fd271c01]

kjournald starting.  Commit interval 5 seconds

EXT3-fs: mounted filesystem with ordered data mode.

eth1394: eth0: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)

Linux agpgart interface v0.102 (c) Dave Jones

agpgart: Detected an Intel 945GM Chipset.

agpgart: Detected 7932K stolen memory.

agpgart: AGP aperture is 256M @ 0xd0000000

Real Time Clock Driver v1.12ac

input: PC Speaker as /class/input/input1

Yenta: CardBus bridge found at 0000:04:04.0 [1462:0341]

Yenta O2: res at 0x94/0xD4: 00/ea

Yenta O2: enabling read prefetch/write burst

intel_rng: FWH not detected

sdhci: Secure Digital Host Controller Interface driver

sdhci: Copyright(c) Pierre Ossman

ieee80211_crypt: registered algorithm 'NULL'

ieee80211: 802.11 data/management/control stack, 1.2.17

ieee80211: Copyright (C) 2004-2005 Intel Corporation 

input: ImPS/2 Logitech Wheel Mouse as /class/input/input2

Yenta: ISA IRQ mask 0x0cb8, PCI irq 16

Socket status: 30000006

Yenta: Raising subordinate bus# of parent bus (#04) from #05 to #08

pcmcia: parent PCI bridge I/O window: 0xd000 - 0xdfff

cs: IO port probe 0xd000-0xdfff: clean.

pcmcia: parent PCI bridge Memory window: 0xff400000 - 0xffcfffff

pcmcia: parent PCI bridge Memory window: 0xbdf00000 - 0xbfefffff

sdhci: SDHCI controller found at 0000:04:04.2 [1217:7120] (rev 1)

ACPI: PCI Interrupt 0000:04:04.2[A] -> GSI 16 (level, low) -> IRQ 16

sdhci:slot0: Unknown controller version (16). You may experience problems.

mmc0: SDHCI at 0xffcffc00 irq 16 PIO

ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19

ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.1d

ipw3945: Copyright(c) 2003-2006 Intel Corporation

ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 18 (level, low) -> IRQ 18

PCI: Setting latency timer of device 0000:03:00.0 to 64

ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection

ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16

PCI: Setting latency timer of device 0000:00:1b.0 to 64

cs: IO port probe 0x100-0x3af: clean.

cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7

cs: IO port probe 0x820-0x8ff: clean.

cs: IO port probe 0xc00-0xcf7: clean.

cs: IO port probe 0xa00-0xaff: clean.

ALSA /usr/src/alsa-driver-1.0.14/pci/hda/../../alsa-kernel/pci/hda/patch_si3054.c:244: si3054: cannot initialize. EXT MID = 0000

Adding 979956k swap on /dev/sda2.  Priority:-1 extents:1 across:979956k

EXT3 FS on sda1, internal journal

loop: loaded (max 8 devices)

device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com

fuse init (API version 7.8)

kjournald starting.  Commit interval 5 seconds

EXT3 FS on sda3, internal journal

EXT3-fs: mounted filesystem with ordered data mode.

pcmcia: Detected deprecated PCMCIA ioctl usage from process: discover.

pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools.

pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details.

r8169: eth1: link up

r8169: eth1: link up

NET: Registered protocol family 10

lo: Disabled Privacy Extensions

ACPI: Battery Slot [BAT1] (battery present)

ACPI: AC Adapter [ADP1] (on-line)

input: Power Button (FF) as /class/input/input3

ACPI: Power Button (FF) [PWRF]

input: Sleep Button (CM) as /class/input/input4

ACPI: Sleep Button (CM) [SLPB]

input: Lid Switch as /class/input/input5

ACPI: Lid Switch [LID0]

input: Power Button (CM) as /class/input/input6

ACPI: Power Button (CM) [PWRB]

lp: driver loaded but no devices found

ppdev: user-space parallel port driver

vboxdrv: Trying to deactivate NMI watchdog permanently...

vboxdrv: Successfully done.

eth1: no IPv6 routers present

[drm] Initialized drm 1.1.0 20060810

ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16

[drm] Initialized i915 1.6.0 20060119 on minor 0

eth1: no IPv6 routers present

ISO 9660 Extensions: Microsoft Joliet Level 3

ISOFS: changing to secondary root

NET: Registered protocol family 4

NET: Registered protocol family 3

NET: Registered protocol family 5

ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen

ata2.01: cmd a0/01:00:00:00:00/00:00:00:00:00/b0 tag 0 cdb 0xac data 8 in

         res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask 0x4 (timeout)

ata2: port is slow to respond, please be patient (Status 0xd0)

ata2: port failed to respond (30 secs, Status 0xd0)

ata2: soft resetting port

ATA: abnormal status 0x7F on port 0x00010177

ATA: abnormal status 0x7F on port 0x00010177

ata2.01: configured for UDMA/33

ata2: EH complete

ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen

ata2.01: cmd a0/01:00:00:00:00/00:00:00:00:00/b0 tag 0 cdb 0xac data 8 in

         res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask 0x4 (timeout)

ata2: port is slow to respond, please be patient (Status 0xd0)

ata2: port failed to respond (30 secs, Status 0xd0)

ata2: soft resetting port

ATA: abnormal status 0x7F on port 0x00010177

ATA: abnormal status 0x7F on port 0x00010177

ata2.01: configured for UDMA/33

ata2: EH complete

ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen

ata2.01: cmd a0/01:00:00:00:00/00:00:00:00:00/b0 tag 0 cdb 0xac data 8 in

         res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask 0x4 (timeout)

ata2: port is slow to respond, please be patient (Status 0xd0)

ata2: port failed to respond (30 secs, Status 0xd0)

ata2: soft resetting port

ATA: abnormal status 0x7F on port 0x00010177

ATA: abnormal status 0x7F on port 0x00010177

ata2.01: configured for UDMA/33

ata2: EH complete

ata2.01: limiting speed to UDMA/25:PIO4

ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen

ata2.01: cmd a0/01:00:00:00:00/00:00:00:00:00/b0 tag 0 cdb 0xac data 8 in

         res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask 0x4 (timeout)

ata2: port is slow to respond, please be patient (Status 0xd0)

ata2: port failed to respond (30 secs, Status 0xd0)

ata2: soft resetting port

ATA: abnormal status 0x7F on port 0x00010177

ATA: abnormal status 0x7F on port 0x00010177

ata2.01: configured for UDMA/25

ata2: EH complete

ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen

ata2.01: cmd a0/01:00:00:00:00/00:00:00:00:00/b0 tag 0 cdb 0xac data 8 in

         res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask 0x4 (timeout)

ata2: port is slow to respond, please be patient (Status 0xd0)

ata2: port failed to respond (30 secs, Status 0xd0)

ata2: soft resetting port

ATA: abnormal status 0x7F on port 0x00010177

ATA: abnormal status 0x7F on port 0x00010177

ata2.01: configured for UDMA/25

ata2: EH complete

ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen

ata2.01: cmd a0/01:00:00:00:00/00:00:00:00:00/b0 tag 0 cdb 0xac data 8 in

         res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask 0x4 (timeout)

ata2: port is slow to respond, please be patient (Status 0xd0)

ata2: port failed to respond (30 secs, Status 0xd0)

ata2: soft resetting port

ATA: abnormal status 0x7F on port 0x00010177

ATA: abnormal status 0x7F on port 0x00010177

ata2.01: configured for UDMA/25

ata2: EH complete

ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen

ata2.01: cmd a0/01:00:00:00:00/00:00:00:00:00/b0 tag 0 cdb 0xac data 8 in

         res 40/00:03:00:00:20/00:00:00:00:00/b0 Emask 0x4 (timeout)

ata2: port is slow to respond, please be patient (Status 0xd0)

ata2: port failed to respond (30 secs, Status 0xd0)

ata2: soft resetting port

ATA: abnormal status 0x7F on port 0x00010177

ATA: abnormal status 0x7F on port 0x00010177

ata2.01: configured for UDMA/25

ata2: EH complete

ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen

ata2.01: cmd a0/01:00:00:00:00/00:00:00:00:00/b0 tag 0 cdb 0xac data 8 in

         res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask 0x4 (timeout)

ata2: port is slow to respond, please be patient (Status 0xd0)

ata2: port failed to respond (30 secs, Status 0xd0)

ata2: soft resetting port

ATA: abnormal status 0x7F on port 0x00010177

ATA: abnormal status 0x7F on port 0x00010177

ata2.01: configured for UDMA/25

ata2: EH complete

ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen

ata2.01: cmd a0/01:00:00:00:00/00:00:00:00:00/b0 tag 0 cdb 0xac data 8 in

         res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask 0x4 (timeout)

ata2: port is slow to respond, please be patient (Status 0xd0)

ata2: port failed to respond (30 secs, Status 0xd0)

ata2: soft resetting port

ATA: abnormal status 0x7F on port 0x00010177

ATA: abnormal status 0x7F on port 0x00010177

ata2.01: configured for UDMA/25

ata2: EH complete

ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen

ata2.01: cmd a0/01:00:00:00:00/00:00:00:00:00/b0 tag 0 cdb 0xac data 8 in

         res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask 0x4 (timeout)

ata2: port is slow to respond, please be patient (Status 0xd0)

ata2: port failed to respond (30 secs, Status 0xd0)

ata2: soft resetting port

ATA: abnormal status 0x7F on port 0x00010177

ATA: abnormal status 0x7F on port 0x00010177

ata2.01: configured for UDMA/25

ata2: EH complete

ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen

ata2.01: cmd a0/01:00:00:00:00/00:00:00:00:00/b0 tag 0 cdb 0xac data 8 in

         res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask 0x4 (timeout)

ata2: port is slow to respond, please be patient (Status 0xd0)

ata2: port failed to respond (30 secs, Status 0xd0)

ata2: soft resetting port

ATA: abnormal status 0x7F on port 0x00010177

ATA: abnormal status 0x7F on port 0x00010177

ata2.01: configured for UDMA/25

ata2: EH complete

ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen

ata2.01: cmd a0/01:00:00:00:00/00:00:00:00:00/b0 tag 0 cdb 0xac data 8 in

         res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask 0x4 (timeout)

ata2: port is slow to respond, please be patient (Status 0xd0)

ata2: port failed to respond (30 secs, Status 0xd0)

ata2: soft resetting port

ATA: abnormal status 0x7F on port 0x00010177

ATA: abnormal status 0x7F on port 0x00010177

ata2.01: configured for UDMA/25

ata2: EH complete

ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen

ata2.01: cmd a0/01:00:00:00:00/00:00:00:00:00/b0 tag 0 cdb 0xac data 8 in

         res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask 0x4 (timeout)

ata2: port is slow to respond, please be patient (Status 0xd0)

ata2: port failed to respond (30 secs, Status 0xd0)

ata2: soft resetting port

ATA: abnormal status 0x7F on port 0x00010177

ATA: abnormal status 0x7F on port 0x00010177

ata2.01: configured for UDMA/25

ata2: EH complete

ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen

ata2.01: cmd a0/01:00:00:00:00/00:00:00:00:00/b0 tag 0 cdb 0xac data 8 in

         res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask 0x4 (timeout)

ata2: port is slow to respond, please be patient (Status 0xd0)

ata2: port failed to respond (30 secs, Status 0xd0)

ata2: soft resetting port

ATA: abnormal status 0x7F on port 0x00010177

ATA: abnormal status 0x7F on port 0x00010177

ata2.01: configured for UDMA/25

ata2: EH complete

ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen

ata2.01: cmd a0/01:00:00:00:00/00:00:00:00:00/b0 tag 0 cdb 0xac data 8 in

         res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask 0x4 (timeout)

ata2: port is slow to respond, please be patient (Status 0xd0)

ata2: port failed to respond (30 secs, Status 0xd0)

ata2: soft resetting port

ATA: abnormal status 0x7F on port 0x00010177

ATA: abnormal status 0x7F on port 0x00010177

ata2.01: configured for UDMA/25

ata2: EH complete

• lsmod

Module                  Size  Used by

appletalk              35052  2 

ax25                   51248  2 

ipx                    27556  2 

p8023                   2848  1 ipx

nls_iso8859_1           4896  0 

isofs                  33532  0 

udf                    76356  0 

i915                   22016  3 

drm                    74708  4 i915

binfmt_misc            11752  1 

vboxdrv                42088  0 

ppdev                   9348  0 

parport_pc             33764  0 

lp                     11652  0 

parport                34216  3 ppdev,parport_pc,lp

button                  8720  0 

ac                      5988  0 

battery                10788  0 

ipv6                  238976  19 

acpi_cpufreq            9448  0 

cpufreq_stats           5984  0 

cpufreq_powersave       2560  0 

cpufreq_conservative     7656  0 

cpufreq_userspace       5376  0 

cpufreq_ondemand        8652  2 

freq_table              5344  3 acpi_cpufreq,cpufreq_stats,cpufreq_ondemand

fuse                   42420  1 

dm_snapshot            17156  0 

dm_mirror              20628  0 

dm_mod                 53260  2 dm_snapshot,dm_mirror

eeprom                  7792  0 

sbp2                   22276  0 

loop                   16456  0 

snd_hda_intel         244984  3 

snd_pcm_oss            40192  0 

snd_mixer_oss          16640  2 snd_pcm_oss

snd_pcm                72548  2 snd_hda_intel,snd_pcm_oss

snd_seq_dummy           4612  0 

snd_seq_oss            31744  0 

snd_seq_midi            8928  0 

snd_rawmidi            23072  1 snd_seq_midi

snd_seq_midi_event      7648  2 snd_seq_oss,snd_seq_midi

tsdev                   8288  0 

snd_seq                47408  6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event

pcmcia                 36012  0 

snd_timer              21380  2 snd_pcm,snd_seq

snd_seq_device          8620  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq

ipw3945               185088  0 

ieee80211              45900  1 ipw3945

ieee80211_crypt         6688  1 ieee80211

i2c_i801                8912  0 

sdhci                  17548  0 

snd                    49860  14 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_dummy,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device

mmc_core               26916  1 sdhci

yenta_socket           25708  1 

rsrc_nonstatic         13280  1 yenta_socket

pcmcia_core            37876  3 pcmcia,yenta_socket,rsrc_nonstatic

serio_raw               7332  0 

firmware_class         10176  2 pcmcia,ipw3945

pcspkr                  3776  0 

rtc                    13048  0 

i2c_core               21280  2 eeprom,i2c_i801

soundcore               8192  2 snd

snd_page_alloc         10408  2 snd_hda_intel,snd_pcm

psmouse                35656  0 

intel_agp              23836  1 

agpgart                32936  3 drm,intel_agp

evdev                   9984  5 

eth1394                19044  0 

raid10                 23008  0 

raid456               119824  0 

xor                    14920  1 raid456

raid1                  22592  0 

raid0                   8736  0 

multipath               9184  0 

linear                  6624  0 

md_mod                 72948  7 raid10,raid456,raid1,raid0,multipath,linear

ehci_hcd               31564  0 

uhci_hcd               23248  0 

ohci1394               33552  0 

ieee1394               89976  3 sbp2,eth1394,ohci1394

usbcore               123656  3 ehci_hcd,uhci_hcd

r8169                  29672  0 

sg                     33148  0 

sr_mod                 16772  0 

cdrom                  33472  1 sr_mod

sd_mod                 20640  4 

thermal                14856  0 

processor              31720  2 acpi_cpufreq,thermal

fan                     5636  0

• /etc/X11/xorg.conf

# /etc/X11/xorg.conf (xorg X Window System server configuration file)

#

# This file was generated by dexconf, the Debian X Configuration tool, using

# values from the debconf database.

#

# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.

# (Type "man /etc/X11/xorg.conf" at the shell prompt.)

#

# This file is automatically updated on xserver-xorg package upgrades *only*

# if it has not been modified since the last upgrade of the xserver-xorg

# package.

#

# If you have edited this file but would like it to be automatically updated

# again, run the following command:

#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"

	# path to defoma fonts

    FontPath 	"/usr/share/fonts/X11/misc"

    FontPath 	"/usr/share/fonts/X11/100dpi:unscaled"

    FontPath 	"/usr/share/fonts/X11/75dpi:unscaled"

    FontPath 	"/usr/share/fonts/X11/Type1"

    FontPath 	"/usr/local/share/fonts"

EndSection

Section "Module"

	Load	"i2c"

	Load	"bitmap"

	Load	"ddc"

	Load	"dri"

	Load	"extmod"

	Load	"freetype"

	Load	"glx"

	Load	"int10"

	Load	"vbe"

EndSection

Section "InputDevice"

	Identifier	"Generic Keyboard"

	Driver		"kbd"

	Option		"CoreKeyboard"

	Option		"XkbRules"	"xorg"

	Option		"XkbModel"	"abnt2"

	Option		"XkbLayout"	"br"

	Option		"XkbVariant"	"abnt2"

EndSection

Section "InputDevice"

	Identifier	"Configured Mouse"

	Driver		"mouse"

	Option		"CorePointer"

	Option		"Device"		"/dev/input/mice"

	Option		"Protocol"		"ImPS/2"

	Option		"Emulate3Buttons"	"true"

EndSection

Section "InputDevice"

	Identifier	"Synaptics Touchpad"

	Driver		"synaptics"

	Option		"SendCoreEvents"	"true"

	Option		"Device"		"/dev/psaux"

	Option		"Protocol"		"auto-dev"

	Option		"HorizScrollDelta"	"0"

	Option 		"SHMConfig" 		"on"

EndSection

Section "Device"

	Identifier	"Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller"

	Driver		"i810"

	BusID		"PCI:0:2:0"

	Option "XAANoOffscreenPixmaps" "true"

	Option "MTRR" "on"

	Option "LinearAlloc" "6144"

	Option "UseFBDev" "false"

	Option "AddARGBGLXVisuals" "true"

#	VideoRam	16384	

EndSection

Section "Monitor"

	Identifier	"Monitor Genérico"

	Option		"DPMS"

EndSection

Section "Screen"

	Identifier	"Default Screen"

	Device		"Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller"

	Monitor		"Monitor Genérico"

	DefaultDepth	24

	SubSection "Display"

		Depth		1

		Modes		"1280x800"

	EndSubSection

	SubSection "Display"

		Depth		4

		Modes		"1280x800"

	EndSubSection

	SubSection "Display"

		Depth		8

		Modes		"1280x800"

	EndSubSection

	SubSection "Display"

		Depth		15

		Modes		"1280x800"

	EndSubSection

	SubSection "Display"

		Depth		16

		Modes		"1280x800"

	EndSubSection

	SubSection "Display"

		Depth		24

		Modes		"1280x800"

	EndSubSection

#	Option "AddARGBGLXVisuals" "True"
EndSection

Section "ServerLayout"

	Identifier	"Default Layout"

	Screen		"Default Screen"

	InputDevice	"Generic Keyboard"

	InputDevice	"Configured Mouse"

	InputDevice	"Synaptics Touchpad"	"AlwaysCore"

EndSection

Section "DRI"

	Mode	0666

EndSection

Section "Extensions"

	Option 		"Composite"		 "enable"

EndSection

• /etc/apt/sources.list

# deb cdrom:[Debian GNU/Linux 4.0 r0 _Lenny_ - Official i386 DVD Binary-1 20070407-11:40]/ lenny contrib main

# deb cdrom:[Debian GNU/Linux 4.0 r0 _Etch_ - Official i386 DVD Binary-1 20070407-11:40]/ etch contrib main

# Line commented out by installer because it failed to verify:

# deb http://security.debian.org/ lenny/updates main contrib

# Line commented out by installer because it failed to verify:

# deb-src http://security.debian.org/ lenny/updates main contrib

# deb http://ftp.debian-unofficial.org/backports/ sarge kde-3.5/main kde-3.5/contrib kde-3.5/non-free

# deb-src http://ftp.debian-unofficial.org/backports/ sarge kde-3.5/main kde-3.5/contrib kde-3.5/non-free

# deb http://www.bootsplash.de/ unstable main

#deb ftp://ftp.us.debian.org/debian/ stable main contrib non-free

deb ftp://ftp.br.debian.org/debian/ stable main contrib non-free

# deb http://www.debian-multimedia.org/ sarge main

# deb http://www.backports.org/debian/ sarge-backports main

# deb http://idefix.eup.uva.es/soleup/ soleupix main games openoffice

# deb http://security.debian.org/ stable/updates main

# deb http://deb.opera.com/opera/ sarge non-free

# deb http://packages.kirya.net/ unstable main contrib non-free

deb http://download.skype.com/linux/repos/debian/ stable non-free

# deb http://pessoal.onda.com.br/rjamorim/debian/ ./

# deb http://www.rarewares.org/debian/packages/unstable/ ./

deb http://security.debian.org/ lenny/updates main contrib non-free

deb http://linorg.usp.br/debian/ lenny main contrib non-free

# deb http://download.skype.com/linux/repos/debian/ testing non-free

# deb http://www.debian-multimedia.org/ lenny main contrib non-free

# deb http://www.debian-multimedia.org/ sarge main contrib non-free

deb http://security.debian.org/ stable/updates main contrib non-free

###

###

###

###

### /etc/apt/sources.list ###

# sources.list montado por Debian For Dummies

# Todos os repositorios podem ter modificações, então, caso algum deles não funciona,

# tente novamente, ou então avise a dfd sobre o problema

#isso representa um comentário

#isso representa um comentário

#isso representa um comentário

#isso representa um comentário

# Todas as linhas do arquivo, irão conter uma "#" isso representa um comentário

#do inicio da linha

#do inicio da linha

#do inicio da linha

#do inicio da linha

# para que a linha possa ser usado, você deve remover a "#" do inicio da linha

# Descomente apenas as linhas que você necessitar usar, não habilite todos juntos

# use para baixar o java, instale, e comente a linha novamente, algumas pessoas

# reclamaram de erros em alguns aplicativos, provavelmente devido ao backports

#########################################################################################

# DEBIAN UNOFICIAL

# Repositorio que contem uma série de aplicativos que não constam na arvore oficial

# do projeto debian, dentre eles, java e netbeans ( java 5.0 )

# SEÇÃO PARA KDE 3.5 PARA O DEBIAN UNOFFICIAL (ainda nao foi testado o suficiente para

# para garantir a funcionalidade deste repositorio)

#########################################################################################
# BOOT SPLASH

# Repositorio que contém os temas e pacotes necessários para instalar o bootsplash

# no debian, ele não deixa funcionando isso pra voce, voce tem que aplicar o patch

# e outras coisas manualmente

#########################################################################################

# REPOSITORIO OFICIAL DEBIAN.ORG

# Repositorio Oficial do projeto debian

#########################################################################################

# REPOSITORIO DEBIAN MULTIMIDIA

# Repositorio que contém aplicativos de audio e vídeo, como o mplayer, dvd::ripper

# entre outras aplicações e codecs

#########################################################################################

# REPOSITORIO BACKPORTS

# Repositorio contendo uma série de aplicativos atualizados que não entrarão na estrutura

# da versão stable do debian

#########################################################################################

# REPOSITORIO IDEFIX

# Este repositório contém uma versão do openoffice.org 2.0 para a versão stable do debian

# Na parte de desktops do wiki da DebianForDummies, voce tem a seção escritório, la esta

# as instruções para a instalação do openoffice 2.0

##########################################################################################

# REPOSITORIO SECURITY

# Repositorio que contém as correções de segurança da arvore oficial do debian

##########################################################################################

# REPOSITORIO OPERA

# Repositório para quem quer usar o navegador Opera

##########################################################################################

# REPOSITORIO TOVID

# Tovid é um aplicativo para converter arquivos de video, em formatos compatíveis

# com VCD/DVD, ele gera os arquivos em formatos para serem vistos em um dvdplayer

# Convencional

# OBS: necessita do repositorio nerim, e debian-unoficial

##########################################################################################

# REPOSITÓRIO SKYPE

# Repositório contendo o aplicativo skype ( repositorio oficial do site skype.com )

##########################################################################################

# Rarewares

# O Rarewares contém vários pacotes raros, principalmente relacinados a formatos de áudio

##########################################################################################

# Configuração para porte para Lenny

# deb http://www.las.ic.unicamp.br/pub/debian-multimedia/ stable main

deb http://mirrors.ecology.uni-kiel.de/debian/debian-multimedia lenny main

deb-src http://mirrors.ecology.uni-kiel.de/debian/debian-multimedia lenny main

# deb http://samiel.theorie.physik.uni-muenchen.de/debian potato main contrib non-free

# deb http://samiel.theorie.physik.uni-muenchen.de/debian lenny main contrib non-free

# deb http://www.linux.lk/~anuradha/beryl/lenny/ ./

deb http://debian.beryl-project.org/ etch main

deb-src http://debian.beryl-project.org/ etch main

### Beryl SVN Repository ###

# deb http://download.tuxfamily.org/3v1deb/ debian-unstable beryl-svn

### Java LG3D Looking Glass ###

deb http://javadesktop.org/lg3d/debian testing contrib

### Enlightment E17 Official Repository ### 

#deb http://edevelop.org/debian/ stable main

### Marillat Debian Multimedia ###

deb http://www.debian-multimedia.org/ testing main

deb-src http://www.debian-multimedia.org/ testing main

### Maxer Multimedia (sometimes Down) ###

# deb http://repos.knio.it/ testing main contrib non-free

# deb-src http://repos.knio.it/ testing main contrib non-free

### Unofficial Debian Repository ###

deb http://ftp.debian-unofficial.org/debian/ testing contrib non-free restricted

deb-src http://ftp.debian-unofficial.org/debian/ testing main contrib non-free restricted

#deb http://debian.beryl-project.org/ etch main

#deb-src http://debian.beryl-project.org/ etch main

deb http://www.virtualbox.org/debian etch non-free

deb http://emacs.orebokech.com sarge main

deb-src http://emacs.orebokech.com sarge main

deb http://dl.google.com/linux/deb/ stable non-free

deb http://www.backports.org/debian etch-backports main contrib non-free

• Snapshots:

Alguns snapshots do Laptop rodando programas (clique para tela cheia):

Powered by ScribeFire.

Um shell-script para renomear arquivos em massa – Versão Ruby

A algum tempo atrás, divulguei aqui um script para renomear arquivos em massa, desenvolvido em Bash. Porém, tive diversos problemas com esse script, principalmente com a questão de extensões em maiúsculas e minúsculas. Como estava procurando uma forma de desenvolver-me em programação Ruby, decidi escrever esse script novo em Ruby. Espero que faça bom proveito desse script, lembrando que ele depende da versão 1.8 do Ruby, principalmente por causa do pacote ‘Optparse’ para trabalhar a questão das opções do script.

PS: Algumas quebras de linha foram inseridas apenas para efeito de legibilidade do código. Elas estão fora da indentação comum do código.

#!/usr/bin/ruby

#
# Estabelecendo variáveis default
#

require 'fileutils'

require 'date'

require 'optparse'

require 'optparse/time'

require 'ostruct'

include FileUtils

options={}

options[:start_prefix]="DSC"

options[:end_prefix]=Date.today.year.to_s+('0'+Date.today.month.to_s)[-2..-1]+('0'+Date.today.day.to_s)[-2..-1]

extensions="(jpg|png|gif|bmp)"

options[:sequence]=0

options[:dir]=Dir.getwd

files=0

filler=''

#

# Utilizando OptionsParse (optparse.rb) para pegar argumentos GETOPTS

#

OptionParser.new do |opts|

  opts.banner = "Uso: ren_images [opções]"

  opts.separator ""

  opts.separator "Opções do script"

  opts.separator "================"

  opts.on("-sPREFIX", "--start-prefix=PREFIX", String, "prefixo inicial a ser usado", 

          "Padrão: #{options[:start_prefix]}") { |options[:start_prefix]| }

  opts.on("-ePREFIX", "--end-prefix=PREFIX", String, "prefixo final a ser usado", 

          "Padrão: #{options[:end_prefix]}") { |options[:end_prefix]| }

  opts.on("-nPREFIX", "--sequence-number=NUMBER", Integer,

          "numero de sequencia inicial a ser usado",

          "Padrão: #{options[:sequence]+1}") 

          { |options[:sequence]| options[:sequence]-=1 }

  opts.on("-dPREFIX", "--directory=DIR", String, 

          "numero de sequencia inicial a ser usado", 

          "Padrão: #{options[:dir]}") { |options[:dir]| }

  opts.on("-f", "--force", "sobrescreve arquivos e diretórios existentes") 

          { |options[:force]|  options[:force]=true }

  opts.on_tail("-h", "--help", "mostra essa mensagem") do

    puts opts

    exit

  end

end.parse!

er = "^#{options[:start_prefix]}[0-9]+\.#{extensions}$"

Dir.open(options[:dir]).each() do |x| 

  x=options[:dir]+"/"+x

  files+=1 unless (not File.exists?(x)) or File.directory?(x) or 

           (not x=~/^(#{options[:dir]}\/)?#{options[:start_prefix]}_?[0-9]+\.#{extensions}$/i)

  files+=1 if x=~^(#{options[:dir]}\/)?#{options[:start_prefix]}[_-]?[0-9]*\.#{extensions}$/i

end

if files==0

  puts "Não há arquivos a serem renomeados"

  exit

end

(Math.log10(files)).ceil.times { filler+='0' }

pos=-(Math.log10(files)).ceil

Dir.open(options[:dir]).sort().each() do |file|

  file_check=options[:dir]+"/"+file

  next if not File.exists?(file_check) or File.directory?(file_check) 

          or (not file_check=~/^(#{options[:dir]}\/)?#{options[:start_prefix]}[_-]?[0-9]*\.#{extensions}$/i)

  extension=file.split('.')

  new_name=String.new

  loop do

    options[:sequence]+=1

    final=filler + options[:sequence].to_s

    new_name=options[:end_prefix] + '_' + final[pos..-1] + '.' +  extension[-1].downcase

    break if not File.exists?(options[:dir]+'/'+new_name) or 

                 new_name.upcase == file.upcase

    break if options[:force]

    puts "Pulando #{new_name}... Arquivo já existe!"

  end

  if File.exists?(new_name)

    puts "Pulando #{new_name}... Arquivo é o mesmo!"

    next

  end

  mv(options[:dir]+"/"+file,options[:dir]+"/"+new_name)

end

Powered by ScribeFire.